Sometimes you need to see which p-point is located towards pipeline or maybe you need to figure out which connection type or diameter is located at the leaving part of the element.
This tool may help you, just navigate to pipe element, open form and press button show Ppoints.
Continue reading Show P-Points in Design
Presentations of 3D models designed by different companies from Russia&CI
Continue reading 3D Engineering Models Gallery designed in AVEVA (Russia&CIS)
While creating Pipe elements, we may face with situation when we need to preview category elements, that’s in current specification. Continue reading Pipe Component Preview
To find clashed elements in CSV format in customizeable way you can you such request. This example search thought pipes under /STABILIZER.
1;# HH CLASH; NOZZLE 2 of EQUIPMENT 1 of ZONE 1 of SITE /AFG-CX01.HVAC; NOZZLE 2 of EQUIPMENT 1 of ZONE 3 of SITE /AFG-CX01.HVAC; at E11299 N1299 U1501;user
2; # HH TOU; NOZZLE 2 of EQUIPMENT 1 of ZONE 1 of SITE /AFG-CX01.HVAC; BOX 1 of EQUIPMENT 1 of ZONE 3 of SITE /AFG-CX01.HVAC; at E11300 N1125 U1500;user Continue reading Clash Report in CSV format
This macro may be used to find out, what END is closer to PANE (or all other types) that is intersects SCTN.
We use clash tool, to find out at what point we have collision and than check which end is closer to it.
Continue reading Find SCTN end clashed with Panel
Usually we need text in 3D model for explanation of structural blocks.
Continue reading 3D Letters with Panels & Plates & Equi
Customers sometime require flow arrows in Review model, exported from Aveva Pdms \ E3D, to indicate flow direction.
Continue reading Flow arrows for Pipes in Navisworks
Sometimes the task is to extract the Dblisting of branch for the subsequent transfer to another place (for example, technical support AVEVA for verification). Since the branch elements are referenced through the catalog specification, then one Datal branch is not enough for the download – you need a catalog and a specification.
Continue reading Dblisting branch with references
Links with guides that cover basics of PML:
Hopefully it will be of use to someone
Sometimes we need to find out position of some P-point in Paragon
but if we use expression with different trigonometric functions and a lot of calculations its very hard to check values.
Continue reading Aveva. Paragon. Measure P-Point Position